top of page

Track Tire Geoprobe

NY State Registered Drilling Certification

PES-Maviro is registered with the State Department of Environmental Conservation to drill or repair water wells.

The Geoprobe® Model 540B direct push machine, one of Geoprobe's® most versatile utility units, has all of the standard features of truck/track mounted units, but uses a compact, skid-steer loader as the carrier/power source. It's small enough for tight places, but heavy enough for tough probing. 

 

Precision Environmental Services, Inc. owns both rubber tire and low ground pressure tracked Bobcat Skid steer loaders for the carrier/power function.  PESs tracked skid steer is equipped with special order extended width low ground pressure tracks (full 18” wide).  This option allows PES to successfully complete drilling needs in soft/ wet ground and/ or extreme slopes situations.   The low pressure tracked capability allows for a high amount of traction coupled with minimal ground disturbance – thus minimizing site restoration needs.   

​

PES utilizes The Geoprobe® Model 540B direct push machine

Additionally, the probing unit can be quickly removed from the skid steer loader to allow installation of an excavation bucket when drilling locations require clearance of snow, earth, debris or other modifications that prevent direct access.  This flexibility results in cost savings to the project by eliminating the need for additional conventional excavation equipment.

​

It's a great unit for rough terrain and limited access probing. It has all the movement features of truck-mounted Geoprobe® machines, including a hydraulic extension in and out from the carrier unit, hydraulic tilt for angle probing, and power lateral movement. The Model 540B comes equipped with remote ignition and hydraulic quick connects for easy connection to the unit's hydraulics.

The Geoprobe® Model 540B direct push machine

Model 540B Features:

​

  • All movements present on truck-mounted Geoprobe® machines, including a hydraulic extension in and out from the carrier unit, hydraulic tilt for angle probing, and power lateral movement.

  • 54-inch (1372 mm) stroke.

  • 25,000 pounds (111kN) pulling capacity, the pulling power you'll need for today's deep probing projects.

  • Longer stroke affords additional space under the probe shell for using longer probe rods and for attaching and removing tools.

  • Equipped with GH40 Soil Probing Hammer.

  • Direct slide lateral movement for offset placement of probes.

  • Angle probing flexibility.

  • Rear stabilization outriggers provide an unsurpassed stable drilling platform.

  • Hydraulic power from skid-steer power components – superior to conventional track or truck-mounted versions.

  • Versatile mounting capabilities. The unit does not require full-time dedication to a carrier vehicle – allowing completion of other on-site tasks without the need for additional equipment.

  • Remote ignition and throttle.

  •  Built-in rotary spindle for concrete drilling, auguring, and anchoring.

  • Auxiliary hydraulic ports provide power for remote equipment

 

Size Specifications:

​

  • Width: 5 feet 6 inches

  • Height: 6 feet 4.5 inches

  • Length: 11 feet

  • Maximum Mast Height: 10 feet

 

Performance Specifications:

​

  • Stroke: 54 inch

  • Weight: 990 Kg

  • Lateral Movement (side-to-side): 838 mm

  • Down Force: 87kN

  • Retraction Force: 25,000 lb. /111 kN

  • Torque: 3,000 ft. lbs.  

Geoprobe Model 6620DT Features

Geoprobe Model 6620DT Features:

​

  • 66in. (1676 mm) probe cylinder stroke allows for the use of 60in. (1,524 mm) probe rods

  • Over 20-ton pulling capacity for today’s larger sampling tools and deeper depths

  • Equipped with the powerful GH62 Hammer

  • Heavy Duty Undercarriage has a wider track that carries more weight, adds more torque, reduces ground pressure and handles greater tool weight

  • Wireless remote control

  • Built-in rotary spindle for concrete drilling, auguring, and anchoring

  • Equipped with a hydraulic winch for handling augers and tripping dual tube sampling tools

  • Two-speed probe cylinder cycles from bottom to top in less than 5 seconds

  • Powered by four-cylinder,54 Hp, liquid-cooled Kubota turbo diesel engine

  • Hydraulic movement in all three axes allows easy probe alignment with tool string

  • Auxiliary hydraulic ports provide power for remote equipment

​

Size Specifications:

 

  • Width: 60 in.

  • Length (folded): 96 in. 

  • Height (folded): 89 in. 

  • Height (unfolded): 153 in. 

 

Performance Specifications:

 

  • Stroke: 66 in.

  • Weight: 6,900 lb. 

  • Lateral Movement (side-to-side): 33 in. 

  • Down Force: 35,000 lb. 

  • Retraction Force: 47,000 lb. 

  • Torque (hammer motor): 560 ft. lb.

bottom of page